Exitex Surface Mounted Intumescent Self Adhesive Strip 1/2 HR 5.2m Roll
In stock
Delivery Information
Delivery Time Frame | Delivery Information |
Next Working Day By 1PM | When an order is placed by 3pm for next working day on certain items |
Standard Delivery | Usually delivered in 2 to 4 working days |
Delivery Charges | |
UK Mainland | Prices start at £6.50 for small items, £9.50 for medium and £20 for large/long items |
Scottish Highlands & Islands, Northern Ireland & Ireland | Prices from £30, please see our delivery page for more info. |
See our full range:
Description
Exitex Surface Mounted Intumescent Self Adhesive Strip with Brush 1/2 HR 5.2m Roll
Fire tested for 30 mins to BS 476: Part 22
Smoke tested to BS EN 1634 - 3: 2004
Application uses
- For use on timber doors that have been successfully tested for a period of 30 minutes in accordance with the criteria of BS 476 Part:22 1987
- Suitable for gaps 3 - 5mm
Features
- 5.2m roll
- Self adhesive
- Speedy installation
- No routing of door or frame
- Colour coded brush
- Available in white & brown
- Alcohol wipe & fire door stickers enclosed
Fitting instructions
- Clean surfaces with alcohol wipe supplied to ensure they are free from dust and grease
- Remove backing tape and position with brush against the door stop as indicated
- Apply to both sides over hinges and latch plate. With a sharp knife cut around the latch plate allowing the door to engage. Apply to top of door frame cutting in corners ensuring a tight fit
- For best results allow the adhesive to cure overnight
- Apply fire door stickers enclosed
Not sure if this Intumescent Strip is right for your requirements?
If you are not sure if this intumescent strip is right for your requirements please contact our friendly team today.